Main Floor:2,413 sq. ft
Upper Floor:990 sq. ft
Additional Rooms:Study, Keeping Room, Loft, Bonus Room
Outdoor Spaces:Rear Porch, Front Porch
Other:Vaulted Ceilings, Loft Open to Below, 1st Floor Master Suite
Exterior Framing:2x4 or 2x6
Home Style:Brick, Traditional, Southern
Lot Style:Corner Lot, Flat Lot
Big Oaks is a traditional brick home design with southern accents. A vaulted foyer leading into the vaulted family room makes for breathe taking views when you enter the house. The rear porch shares a two-sided fireplace with the family room allowing you to enjoy a cozy fire indoors or out. A vaulted master suite and breakfast room have palladian windows out the rear that creates exceptional views and allows natural light to enter the rooms. The upper level comes with three bedrooms, a study loft and a bonus room with a sloping ceiling. This plan will work great for a large family in a southern country setting.
Each set of plans includes:
All sales on house plans and customization/modifications are final. No refunds or exchanges can be given once your order has started the fulfillment process. All house plans from maxhouseplans are designed to conform to the local codes when and where the original house was constructed. In addition to the house plans you order, you may also need a site plan that shows where the house is going to be located on the property. You might also need beams sized to accommodate roof loads specific to your region. Your home builder can usually help you with this. Many areas now have area-specific energy codes that also have to be followed. This normally involves filling out a simple form providing documentation that your house plans are in compliance. In some regions, there is a second step you will need to take to insure your house plans are in compliance with local codes. Some areas of North America have very strict engineering requirements. New York, New Jersey, Nevada, and parts of Illinois require review by a local professional as well as some other areas. If you are building in these areas, it is most likely you will need to hire a state licensed structural engineer to analyze the design and provide additional drawings and calculations required by your building department. If you aren’t sure, building departments typically have a handout they will give you listing all of the items they require to submit for and obtain a building permit. Additionally, stock plans do not have a professional stamp attached. If your building department requires one, they will only accept a stamp from a professional licensed in the state where you plan to build. In this case, you will need to take your house plans to a local engineer or architect for review and stamping.