Main Floor:1,111 sq. ft.
Upper Floor:502 sq. ft
Lower Floor:1,111 sq. ft.
Additional Rooms:Golf Garage, Game Room, Flex Room
Outdoor Spaces:Front Porch, Screened Rear Porch, Covered Side Porch, Grill Deck, Open Upper Deck, Lower Patio
Other:Vaulted Family Room, 1st Floor Master, Open Floorplan
Exterior Framing:2x4 or 2x6
Home Style:Cottage, Rustic, Craftsman
Lot Style:Sloping Lot, Corner Lot, Narrow Lot
As you enter the Foothills Cottage, you enjoy views from two window walls in the open family room, dining and kitchen areas. The dining room has a panoramic view with windows on five sides. Vaulted ceilings, exposed beams, and a stone fireplace complete the rustic but formal feel in this area. The Master suite has a great view on the rear of the house. The Master Bath features a walk in shower and walk in closet. The Master Bedroom opens onto a covered porch with an outdoor fireplace. The upper level includes a balcony overlooking the vaulted family room below. There are also two bedrooms and a Jack and Jill Bath on this level. One of the bedrooms opens onto a spacious deck overlooking the rear views of the home.The lower level can be finished and includes a large recreation room, two bedrooms and a bath. The exterior features Stone, Shake, and Board & Batten as well as craftsman details to give the home just the right Mountain / Lake feel.
Each set of plans includes:
All sales on house plans and customization/modifications are final. No refunds or exchanges can be given once your order has started the fulfillment process. All house plans from maxhouseplans are designed to conform to the local codes when and where the original house was constructed. In addition to the house plans you order, you may also need a site plan that shows where the house is going to be located on the property. You might also need beams sized to accommodate roof loads specific to your region. Your home builder can usually help you with this. Many areas now have area-specific energy codes that also have to be followed. This normally involves filling out a simple form providing documentation that your house plans are in compliance. In some regions, there is a second step you will need to take to insure your house plans are in compliance with local codes. Some areas of North America have very strict engineering requirements. New York, New Jersey, Nevada, and parts of Illinois require review by a local professional as well as some other areas. If you are building in these areas, it is most likely you will need to hire a state licensed structural engineer to analyze the design and provide additional drawings and calculations required by your building department. If you aren’t sure, building departments typically have a handout they will give you listing all of the items they require to submit for and obtain a building permit. Additionally, stock plans do not have a professional stamp attached. If your building department requires one, they will only accept a stamp from a professional licensed in the state where you plan to build. In this case, you will need to take your house plans to a local engineer or architect for review and stamping.