Main Floor:1,795 sq. ft.
Upper Floor:1,135 sq. ft.
Additional Rooms:laundry, optional bonus, storage
Outdoor Spaces:front porch, open deck
Other:1st floor master bedroom, open living, stone fireplace
Exterior Framing:2x4 or 2x6
Ceiling Height:9', vaulted master suite, 11' family room
Home Style:Country, Farmhouse, Garage
Lot Style:flat lot
Traditional architectural details on the exterior of this house make it pop from the roadside. A wrap around porch on the front adds detail to the elevation and provides a place to hangout and enjoy nature with your family. The master suite and master bath are vaulted adding an open elegant feel to the room. Upstairs you will find plenty of sleeping room and vaulted ceilings to add to the views from within the house. A two car garage has a spacious storage room to prevent the garage from getting cluttered.
Each set of plans includes:
All sales on house plans and customization/modifications are final. No refunds or exchanges can be given once your order has started the fulfillment process. All house plans from Houseplans are designed to conform to the local codes when and where the original house was constructed. In addition to the house plans you order, you may also need a site plan that shows where the house is going to be located on the property. You might also need beams sized to accommodate roof loads specific to your region. Your home builder can usually help you with this. You may also need a septic design unless your lot is served by a sanitary sewer system. Many areas now have area-specific energy codes that also have to be followed. This normally involves filling out a simple form providing documentation that your house plans are in compliance. To find out what documents you should expect with your house plans, see what's included? In some regions, there is a second step you will need to take to insure your house plans are in compliance with local codes. Some areas of North America have very strict engineering requirements. Examples of this would be, but not limited to, earthquake-prone areas of California and the Pacific Coast, hurricane risk areas of the Florida, Gulf & Carolina Coasts. New York, New Jersey, Nevada, and parts of Illinois require review by a local professional as well. If you are building in these areas, it is most likely you will need to hire a state licensed structural engineer to analyze the design and provide additional drawings and calculations required by your building department. If you aren’t sure, building departments typically have a handout they will give you listing all of the items they require to submit for and obtain a building permit. Additionally, stock plans do not have a professional stamp attached. If your building department requires one, they will only accept a stamp from a professional licensed in the state where you plan to build. In this case, you will need to take your house plans to a local engineer or architect for review and stamping. In addition, plans which are used to construct homes in Nevada are required to be drawn by a licensed Nevada architect.