Main Floor:1989 Sq. Ft.
Lower Floor:Optional 1989 Sq. Ft.
Additional Rooms:Mechanical Room, Recreation Room, Bunk Room, Flex Room
Outdoor Spaces:Front Porch, Open Deck, Screened Porch, Breezeway, Covered Porch
Other:Walkout Basement, Covered Terrace
Exterior Framing:2x4 or 2x6
Ceiling Height:9', Vaulted Family Room, Vaulted Master Suite, Vaulted Screened Porch, Vaulted bedroom
Home Style:Rustic, Mountain, Craftsman, A-Frame, Lake
Lot Style:Sloping Lot, Mountain Lot, Lake Lot
The Appalachia Mountain II is a two story rustic open house plan a 3 car garage and a walkout basement. It’s a version of our popular Appalachia Mountain plan with a 3 car garage. You enter the home through the front porch to a vaulted great room including the kitchen, dining and living room. Large windows on the rear allow for natural lighting and great views of your lot. The master bedroom is vaulted and has access to it’s own vaulted screened porch with a stoned fireplace. The rear of the home also features an open deck, covered porch and covered terrace on the lower level. The basement can be built finished or unfinished and features a bunk room and a large recreational room with a bar.
Each set of plans includes:
All sales on house plans and customization/modifications are final. No refunds or exchanges can be given once your order has started the fulfillment process. All house plans from maxhouseplans are designed to conform to the local codes when and where the original house was constructed. In addition to the house plans you order, you may also need a site plan that shows where the house is going to be located on the property. You might also need beams sized to accommodate roof loads specific to your region. Your home builder can usually help you with this. Many areas now have area-specific energy codes that also have to be followed. This normally involves filling out a simple form providing documentation that your house plans are in compliance. In some regions, there is a second step you will need to take to insure your house plans are in compliance with local codes. Some areas of North America have very strict engineering requirements. New York, New Jersey, Nevada, and parts of Illinois require review by a local professional as well as some other areas. If you are building in these areas, it is most likely you will need to hire a state licensed structural engineer to analyze the design and provide additional drawings and calculations required by your building department. If you aren’t sure, building departments typically have a handout they will give you listing all of the items they require to submit for and obtain a building permit. Additionally, stock plans do not have a professional stamp attached. If your building department requires one, they will only accept a stamp from a professional licensed in the state where you plan to build. In this case, you will need to take your house plans to a local engineer or architect for review and stamping.