Main Floor:1401 Sq. Ft.
Lower Floor:1132 Sq. Ft.
Additional Rooms:Mechanical/Storage Room, Recreation Room
Garage:Golf Cart Garage
Outdoor Spaces:Front Porch, Side Screen Porch, Rear Porch, Terrace Patio
Other:Golf Garage, Double Sided Fireplace
Exterior Framing:2x4 or 2x6
Ceiling Height:9', Vaulted Living Room, Vaulted Master Bedroom, 10' Walkout Basement
Home Style:Rustic, Mountain, Lake, Craftsman, Small, Open Living
Lot Style:Small Lot, Narrow Lot, Sloped Lot, Lake Lot, Mountain Lot
Our Blowing Rock Cottage is a small cabin home plan with an open living floor plan and a craftsman exterior with rustic details. This cottage plan will work great as a mountain or lake house plan. The main floor has a vaulted living room open to the kitchen and dining room and also features a stone fireplace in the vaulted great room. The master suite is also located on the main level and has a spacious master bathroom with enough room for a clawfoot tub and walk-in shower. Ample porch space on opposite sides of the house allows you to enjoy the views of your lot from every angle of the home. The walkout basement has two more bedrooms and a recreation room with a stone fireplace.
Each set of plans includes:
All sales on house plans and customization/modifications are final. No refunds or exchanges can be given once your order has started the fulfillment process. All house plans from maxhouseplans are designed to conform to the local codes when and where the original house was constructed. In addition to the house plans you order, you may also need a site plan that shows where the house is going to be located on the property. You might also need beams sized to accommodate roof loads specific to your region. Your home builder can usually help you with this. Many areas now have area-specific energy codes that also have to be followed. This normally involves filling out a simple form providing documentation that your house plans are in compliance. In some regions, there is a second step you will need to take to insure your house plans are in compliance with local codes. Some areas of North America have very strict engineering requirements. New York, New Jersey, Nevada, and parts of Illinois require review by a local professional as well as some other areas. If you are building in these areas, it is most likely you will need to hire a state licensed structural engineer to analyze the design and provide additional drawings and calculations required by your building department. If you aren’t sure, building departments typically have a handout they will give you listing all of the items they require to submit for and obtain a building permit. Additionally, stock plans do not have a professional stamp attached. If your building department requires one, they will only accept a stamp from a professional licensed in the state where you plan to build. In this case, you will need to take your house plans to a local engineer or architect for review and stamping.