Main Floor:1,770 sq. ft
Heated Area:1,770 sq. ft.
Garage:2 car 550 sq. ft
Outdoor Spaces:front porch, covered porch, side courtyard
Exterior Framing:2x4 or 2x6
Ceiling Height:9', vaulted family room
Home Style:Cottage, Rustic, Craftsman
Lot Style:small lot
Fireside Cottage is a small house plan design with a two car garage and covered porch. You enter Fireside Cottage to a family room with a fireplace and views into the side courtyard. The kitchen, dining, and family room are open to each other which create a comfortable feel when hanging out with family and friends. A spacious master suite and two bedrooms are located on the rear of the house. There is a two car garage on the left that can easily fit three cars or provide storage room. The master suite and family room have access to a covered porch and side courtyard for grilling out and letting your pets play.
Each set of plans includes:
All sales on house plans and customization/modifications are final. No refunds or exchanges can be given once your order has started the fulfillment process. All house plans from maxhouseplans are designed to conform to the local codes when and where the original house was constructed. In addition to the house plans you order, you may also need a site plan that shows where the house is going to be located on the property. You might also need beams sized to accommodate roof loads specific to your region. Your home builder can usually help you with this. Many areas now have area-specific energy codes that also have to be followed. This normally involves filling out a simple form providing documentation that your house plans are in compliance. In some regions, there is a second step you will need to take to insure your house plans are in compliance with local codes. Some areas of North America have very strict engineering requirements. New York, New Jersey, Nevada, and parts of Illinois require review by a local professional as well as some other areas. If you are building in these areas, it is most likely you will need to hire a state licensed structural engineer to analyze the design and provide additional drawings and calculations required by your building department. If you aren’t sure, building departments typically have a handout they will give you listing all of the items they require to submit for and obtain a building permit. Additionally, stock plans do not have a professional stamp attached. If your building department requires one, they will only accept a stamp from a professional licensed in the state where you plan to build. In this case, you will need to take your house plans to a local engineer or architect for review and stamping.