Main Floor:1466 Sq. Ft.
Upper Floor:675 Sq. Ft.
Lower Floor:1466 Sq. Ft.
Width:78' 1 1/2"
Additional Rooms:Storage, Recreation Room
Outdoor Spaces:A-Framed Porch, Patio, Open Deck, Front Porch
Other:A-Frame, Upper level bedroom open to below
Exterior Framing:2x4 or 2x6
Ceiling Height:9', Vaulted Great Room, Vaulted Upper Bedroom
Home Style:A-Frame, Cabin, Rustic, Mountain, Lake, Craftsman
Lot Style:sloping, narrow, mountain, lake
Our Boulder Mountain Cabin house plan is a A-frame cabin plan with an open layout. This plan features a stunning exterior with rustic elements and craftsman details that really makes the home stand out in a mountain or lake setting. You enter the front porch to a vaulted great room with a large a-framed wall of windows to take advantage of your views. An open porch wraps around the cabin allowing you to take in the views from multiple angles of the cabin. On the upper level you will find two bedrooms, one which has sliding barn doors looking into the great room below. The lower level features a recreation room, ample storage space and access to the outside covered porch.
Each set of plans includes:
All sales on house plans and customization/modifications are final. No refunds or exchanges can be given once your order has started the fulfillment process. All house plans from maxhouseplans are designed to conform to the local codes when and where the original house was constructed. In addition to the house plans you order, you may also need a site plan that shows where the house is going to be located on the property. You might also need beams sized to accommodate roof loads specific to your region. Your home builder can usually help you with this. Many areas now have area-specific energy codes that also have to be followed. This normally involves filling out a simple form providing documentation that your house plans are in compliance. In some regions, there is a second step you will need to take to insure your house plans are in compliance with local codes. Some areas of North America have very strict engineering requirements. New York, New Jersey, Nevada, and parts of Illinois require review by a local professional as well as some other areas. If you are building in these areas, it is most likely you will need to hire a state licensed structural engineer to analyze the design and provide additional drawings and calculations required by your building department. If you aren’t sure, building departments typically have a handout they will give you listing all of the items they require to submit for and obtain a building permit. Additionally, stock plans do not have a professional stamp attached. If your building department requires one, they will only accept a stamp from a professional licensed in the state where you plan to build. In this case, you will need to take your house plans to a local engineer or architect for review and stamping.