Main Floor:1,213 sq. ft
Upper Floor:2,292 sq. ft
Heated Area:3,505 Sq. Ft.
Additional Rooms:Keeping Room, Loft, Study
Outdoor Spaces:Covered Rear Porch, Side Stoop, Front Stoop
Other:1st Floor Master,
Exterior Framing:2x4 or 2x6
Home Style:Cottage, Mountain, Country
Lot Style:Corner Lot
This large two story cottage house floor plan is constructed with a creative blend of stone, brick and horizontal siding. Architectural details throughout the house make each room unique. The family room has a coffered ceiling and fireplace allowing you to enjoy a cozy fire with your family. A vaulted keeping room also has a fireplace and is open to the breakfast room. The master suite has a his or her closet so you can easily keep your clothes separated. With a spacious rear porch you can cookout and enjoy the scenery of your lot simultaneously. The terrace level has three bedrooms and a loft to watch tv and relax.
Each set of plans includes:
All sales on house plans and customization/modifications are final. No refunds or exchanges can be given once your order has started the fulfillment process. All house plans from maxhouseplans are designed to conform to the local codes when and where the original house was constructed. In addition to the house plans you order, you may also need a site plan that shows where the house is going to be located on the property. You might also need beams sized to accommodate roof loads specific to your region. Your home builder can usually help you with this. Many areas now have area-specific energy codes that also have to be followed. This normally involves filling out a simple form providing documentation that your house plans are in compliance. In some regions, there is a second step you will need to take to insure your house plans are in compliance with local codes. Some areas of North America have very strict engineering requirements. New York, New Jersey, Nevada, and parts of Illinois require review by a local professional as well as some other areas. If you are building in these areas, it is most likely you will need to hire a state licensed structural engineer to analyze the design and provide additional drawings and calculations required by your building department. If you aren’t sure, building departments typically have a handout they will give you listing all of the items they require to submit for and obtain a building permit. Additionally, stock plans do not have a professional stamp attached. If your building department requires one, they will only accept a stamp from a professional licensed in the state where you plan to build. In this case, you will need to take your house plans to a local engineer or architect for review and stamping.