You are here: Home >> House Plans >> Lake Eufala Retreat House Plan
Main Floor:1,052 sq. ft
Upper Floor:1,439 sq. ft
Heated Area:2,491 sq. ft.
Outdoor Spaces:wraparound porch, front porch
Other:open living, stone fireplace, upper level master bedroom
Exterior Framing:2x4 or 2x6
Home Style:Rustic, Craftsman, Garage
Lot Style:corner lot, flat lot
Lake Eufala Retreat is a two story four bedroom house plan that can work great as your vacation or primary home. It has all the features you need for a large family to live comfortably. A rustic exterior with craftsman style detail and a wraparound porch is eye-catching from the road. A family room accompanied by a fireplace is separated from the dining by columns creating an open feel and great views from within. The upper level has four bedrooms all of which have their own spacious walk-in closets. The Master suite has a tray ceiling and two walk-in closets on opposite of the room. A two car garage has easy access to both the kitchen and the stairs leading to the upper bedrooms.
Each set of plans includes:
All sales on house plans and customization/modifications are final. No refunds or exchanges can be given once your order has started the fulfillment process. All house plans from maxhouseplans are designed to conform to the local codes when and where the original house was constructed. In addition to the house plans you order, you may also need a site plan that shows where the house is going to be located on the property. You might also need beams sized to accommodate roof loads specific to your region. Your home builder can usually help you with this. Many areas now have area-specific energy codes that also have to be followed. This normally involves filling out a simple form providing documentation that your house plans are in compliance. In some regions, there is a second step you will need to take to insure your house plans are in compliance with local codes. Some areas of North America have very strict engineering requirements. New York, New Jersey, Nevada, and parts of Illinois require review by a local professional as well as some other areas. If you are building in these areas, it is most likely you will need to hire a state licensed structural engineer to analyze the design and provide additional drawings and calculations required by your building department. If you aren’t sure, building departments typically have a handout they will give you listing all of the items they require to submit for and obtain a building permit. Additionally, stock plans do not have a professional stamp attached. If your building department requires one, they will only accept a stamp from a professional licensed in the state where you plan to build. In this case, you will need to take your house plans to a local engineer or architect for review and stamping.