Fairy Tale Cottage
Floor Plans:
House Plan Specs
Main Floor:
1272 Sq. Ft.Upper Floor:
571 Sq. Ft.Lower Floor:
1236 Sq. Ft.Heated Area:
1932 Sq. Ft.
Total Living Area:
Width:
48'Depth:
46'8"
Plan Dimensions:
-
Bedrooms:
3 -
Bathrooms:
3 1/2 -
Stories:
3 -
Additional Rooms:
Loft, Bunk Room, Tower Room 85 Sq. Ft., Theater Room, Recreation Room, Flex Room -
Garage:
none -
Outdoor Spaces:
Front Stoop, Covered Porch, Screened Porch, Grill Deck -
Other:
Open Living Floor Plan, Spiral Staircase Tower
House Features
-
Roof:
12/2 -
Exterior Framing:
2x4 or 2x6 -
Ceiling Height:
Vaulted Family Room, 9'
Plan Features
-
Home Style:
Rustic, Mountain, Lake, Small -
Lot Style:
Small
Plan Styles
The Fairy Tale Cottage is a small cottage house plan with a loft and screened porches. The exterior has a mix of shake, board and batten, arched gables and porches giving it a true fairy tale cottage look and feel. Inside the home you will find a living room, kitchen and dining room all open to each other creating a living large feeling and allowing you to easily converse with your family and guests. The family room is vaulted with a stone fireplace and access to the covered and screened porch. On the upper level you will find a loft open to below, one bedroom and a bunk room. A spiral staircase leads to a tower room that you can use as an office or dining space with views from above. On the lower level you will find a guest bedroom, recreation room and a theater room. Contact us today to make this fairy tale cottage become your reality.
Each set of plans includes:
Elevations
Floor Plans
Foundation Plan
Roof Plan
Notes:
All sales on house plans and customization/modifications are final. No refunds or exchanges can be given once your order has started the fulfillment process. All house plans from maxhouseplans are designed to conform to the local codes when and where the original house was constructed. In addition to the house plans you order, you may also need a site plan that shows where the house is going to be located on the property. You might also need beams sized to accommodate roof loads specific to your region. Your home builder can usually help you with this. Many areas now have area-specific energy codes that also have to be followed. This normally involves filling out a simple form providing documentation that your house plans are in compliance. In some regions, there is a second step you will need to take to insure your house plans are in compliance with local codes. Some areas of North America have very strict engineering requirements. New York, New Jersey, Nevada, and parts of Illinois require review by a local professional as well as some other areas. If you are building in these areas, it is most likely you will need to hire a state licensed structural engineer to analyze the design and provide additional drawings and calculations required by your building department. If you aren’t sure, building departments typically have a handout they will give you listing all of the items they require to submit for and obtain a building permit. Additionally, stock plans do not have a professional stamp attached. If your building department requires one, they will only accept a stamp from a professional licensed in the state where you plan to build. In this case, you will need to take your house plans to a local engineer or architect for review and stamping.
More House Plans
Houzz
Connect With Us
Like us on Facebook to see new plans and pictures: