Main Floor:940 sq. ft
Upper Floor:447 sq. ft
Heated Area:1,387 sq. ft.
Additional Rooms:recreation, bunk room
Outdoor Spaces:covered porch, screen porch, grill deck, covered patio
Other:first floor master, double sided stone fireplace
Exterior Framing:2x4 or 2x6
Ceiling Height:9', vaulted great room
Home Style:Cottage, Cabin, Lake
Lot Style:sloping lot, narrow lot
Coosa River is a small narrow lot house plan that will work great at the lake or in the mountains. You enter the house to an open kitchen and vaulted great room with a fireplace. The rear and left side of the house is covered with porches so you can enjoy the scenery with your family. The master suite has a walk-in closet and access to the covered porch on the rear. Two rooms upstairs and a bunk room downstairs provide plenty of sleeping room for your guests and family. There is also a recreation room on the lower level to help you enjoy your getaway from reality.
Each set of plans includes:
All sales on house plans and customization/modifications are final. No refunds or exchanges can be given once your order has started the fulfillment process. All house plans from maxhouseplans are designed to conform to the local codes when and where the original house was constructed. In addition to the house plans you order, you may also need a site plan that shows where the house is going to be located on the property. You might also need beams sized to accommodate roof loads specific to your region. Your home builder can usually help you with this. Many areas now have area-specific energy codes that also have to be followed. This normally involves filling out a simple form providing documentation that your house plans are in compliance. In some regions, there is a second step you will need to take to insure your house plans are in compliance with local codes. Some areas of North America have very strict engineering requirements. New York, New Jersey, Nevada, and parts of Illinois require review by a local professional as well as some other areas. If you are building in these areas, it is most likely you will need to hire a state licensed structural engineer to analyze the design and provide additional drawings and calculations required by your building department. If you aren’t sure, building departments typically have a handout they will give you listing all of the items they require to submit for and obtain a building permit. Additionally, stock plans do not have a professional stamp attached. If your building department requires one, they will only accept a stamp from a professional licensed in the state where you plan to build. In this case, you will need to take your house plans to a local engineer or architect for review and stamping.