Main Floor:
1,562 sq. ftUpper Floor:
Lower Floor:
1,250 sq. ftHeated Area:
2,812 sq. ft.Width:
69'10"Depth:
54'8"Bedrooms:
3Bathrooms:
2 1/2Stories:
2Additional Rooms:
recreation room, storageGarage:
3 carOutdoor Spaces:
front porch, rear porch, screen porch, grill deck, patioOther:
open living, double sided stone fireplace, main level master bedroomRoof:
11'2Exterior Framing:
2x4 or 2x6Ceiling Height:
9', vaulted family room, vaulted master bedroomHome Style:
Rustic, Craftsman, LakeLot Style:
sloping lotOld Stone Cottage is a two story cottage house plan with three bedrooms and an open floor plan that will work great as a vacation or primary home. With over sized gables, stone, shake and horizontal siding the exterior of this cottage is eye-catching. Vaulted rooms throughout the house add elegance and create an open feel. Porches on multiple sides of the house allow you to enjoy the scenery of your lot with your family. On the terrace level you will find a spacious recreation room for entertainment and relaxation. The terrace level also has a storage room, wet bar and two bedrooms with a walkout basement.
Each set of plans includes:
Notes:
All sales on house plans and customization/modifications are final. No refunds or exchanges can be given once your order has started the fulfillment process. All house plans from maxhouseplans are designed to conform to the local codes when and where the original house was constructed. In addition to the house plans you order, you may also need a site plan that shows where the house is going to be located on the property. You might also need beams sized to accommodate roof loads specific to your region. Your home builder can usually help you with this. Many areas now have area-specific energy codes that also have to be followed. This normally involves filling out a simple form providing documentation that your house plans are in compliance. In some regions, there is a second step you will need to take to insure your house plans are in compliance with local codes. Some areas of North America have very strict engineering requirements. New York, New Jersey, Nevada, and parts of Illinois require review by a local professional as well as some other areas. If you are building in these areas, it is most likely you will need to hire a state licensed structural engineer to analyze the design and provide additional drawings and calculations required by your building department. If you aren’t sure, building departments typically have a handout they will give you listing all of the items they require to submit for and obtain a building permit. Additionally, stock plans do not have a professional stamp attached. If your building department requires one, they will only accept a stamp from a professional licensed in the state where you plan to build. In this case, you will need to take your house plans to a local engineer or architect for review and stamping.